PS1500N Suspension Clamp for LV ABC Overhead Cables 25-95mm² | CNNILED
MOQ:2000
|
Model Parameters |
PS1500N |
|---|---|
|
Product Name |
Suspension Clamp |
|
Cross-Section |
25–95 mm² |
|
Breaking Load |
15 kN |
- Overview
- Recommended Products
Low-voltage overhead distribution networks
Aerial bundled cable suspension
Utility pole cable installations
Overhead electrical line construction
Cable support at designated suspension points
Maintenance and replacement of compatible suspension fittings
PS1500N Suspension Clamp for LV ABC Overhead Cables
Product Overview
The CNNILED PS1500N Suspension Clamp is designed to support and suspend low-voltage aerial bundled cables (LV ABC) in overhead electrical distribution systems.
With a conductor cross-section range of 25–95 mm² and a specified breaking load of 15 kN, the PS1500N provides a suspension solution for compatible overhead cable installations.
The clamp features a black molded body, an integrated suspension eye, and a cable-supporting section designed to accommodate the conductor during installation.
Its configuration allows the cable to be supported at designated suspension points along an overhead distribution line.
Key Features
1. Suspension Design for LV ABC Cables
The PS1500N is intended for suspension applications involving compatible low-voltage aerial bundled cables.
The clamp provides a connection between the cable and a suitable supporting structure, such as a utility pole fitted with compatible mounting hardware.
The suspension arrangement helps maintain the intended cable position along the overhead line.
2. 25–95 mm² Conductor Range
The PS1500N is specified for a conductor cross-section range of 25–95 mm².
This range makes the clamp suitable for selected LV ABC cable configurations within the stated specifications.
Cable compatibility should be confirmed before installation, including the conductor construction and overall cable dimensions.
3. 15 kN Breaking Load
The PS1500N has a specified breaking load of 15 kN.
This value represents the stated breaking-load specification and should not be interpreted as the allowable working load.
The appropriate installation load must be determined according to the manufacturer's technical requirements, applicable safety factors, and project conditions.
4. Integrated Suspension Eye
The clamp incorporates a molded suspension eye for connection to compatible pole-mounted suspension hardware.
This design allows the clamp to be positioned at a suspension point without requiring a separate eye component within the clamp body.
The mounting arrangement should be checked for mechanical compatibility before installation.
5. Cable-Supporting Body
The PS1500N features a shaped cable-supporting section intended to hold the conductor in the required suspension position.
The molded body incorporates structural features that support the cable and help guide its placement during installation.
Correct cable positioning is important for the intended operation of the clamp.
6. Compact Component Design
The PS1500N combines the suspension eye, cable-supporting body, and retaining structure into a compact assembly.
Its design is suitable for use as part of an overhead cable suspension system.
The exact material composition and environmental performance should be confirmed against the product's technical documentation.
Technical Specifications
| Parameter | Specification |
|---|---|
| Brand | CNNILED |
| Model | PS1500N |
| Product Name | Suspension Clamp |
| Conductor Cross-Section | 25–95 mm² |
| Breaking Load | 15 kN |
| Application | LV ABC Overhead Cable Suspension |
| Product Category | Aerial Cable Accessories |
Applications
The CNNILED PS1500N Suspension Clamp is intended for compatible applications including:
The suitability of the PS1500N depends on cable specifications, mounting hardware, installation loads, and environmental conditions.
Installation Considerations
Before installation, verify that the conductor falls within the specified cross-section range of 25–95 mm².
Inspect the clamp body, suspension eye, and cable-supporting components for visible damage.
Ensure that the suspension eye is connected to compatible mounting hardware and that the conductor is positioned correctly within the clamp.
Installation loads should remain within the allowable limits established for the complete suspension system.
The stated breaking load of 15 kN must not be used directly as the permitted working load.
Installation should be performed by qualified personnel in accordance with the relevant project requirements and applicable electrical safety procedures.
Why Choose CNNILED?
CNNILED supplies electrical fittings and aerial cable accessories for international B2B customers.
Our product portfolio includes suspension clamps, dead end clamps, anchor brackets, insulation piercing connectors, parallel groove clamps, and other overhead distribution accessories.
The PS1500N Suspension Clamp is part of CNNILED's product range for overhead cable suspension applications.
We support distributors, electrical contractors, utility equipment suppliers, and project procurement teams with product information and wholesale inquiries.
For detailed technical specifications, cable compatibility, and bulk quotations, please contact CNNILED.
CNNILED — Electrical Fittings & Aerial Cable Accessories


