Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
p71 t type overhead line clamp-0

Suspension Clamp

Home >  Products >  Aerial Cable Accessories >  Suspension Clamp

P71 T-Type Overhead Line Clamp for Power Distribution

MOQ:2000

Model Parameters P71
Product Name T-Type Overhead Clamp
Main Conductor Range 35–120 mm²
Branch Conductor Range 2 x 6–70 mm²
  • Overview
  • Recommended Products

Unknown.png

P71 T-Type Overhead Line Clamp

Product Overview

The CNNILED P71 T-Type Overhead Line Clamp is designed for compatible T-type conductor branching arrangements in overhead electrical distribution systems. It provides a defined connection configuration for projects that require a branch connection from a main overhead conductor.

The P71 combines a black insulated housing with a separate metal fastening component, as shown in the product images.

The specified main conductor range is 35–120 mm², while the branch conductor configuration is 2 × 6–70 mm². These figures should be checked against the conductors selected for each project. Customers should also confirm conductor material, construction, insulation, and applicable installation requirements before ordering.

Product Design and Features

1. T-Type Connection Configuration

A T-type branch arrangement allows a connection to be made from a main conductor to a branch circuit.

The P71 T-Type Overhead Line Clamp is intended for projects where this type of conductor arrangement is required. Its suitability depends on the full electrical and mechanical requirements of the installation, not only the nominal conductor cross-sectional area.

2. Dual Branch Configuration

The listed branch specification for the P71 is 2 × 6–70 mm².

This identifies the model as a candidate for applications requiring the stated branch conductor arrangement. Buyers should confirm the exact configuration with CNNILED when preparing technical submissions or purchasing documents.

3. Insulated Outer Housing

The P71 features a black outer housing that covers the connection assembly.

The housing is part of the product's integrated design and helps keep the components together in a compact arrangement.

Specific insulation performance, weather resistance, and environmental ratings should be verified through the applicable technical documentation rather than assumed from appearance.

4. Metal Fastening Component

The product includes a metal fastening assembly supplied with the housing.

Correct fastening and assembly are important considerations in any overhead line connection. The required tightening procedure and installation method should be confirmed from the manufacturer's instructions before use.

5. Compact Product Arrangement

The P71 brings the housing and fastening components into a relatively compact form.

This can be useful when comparing overhead line fittings for space-limited conductor arrangements, although project-specific clearances and installation requirements must still be checked.

Technical Specifications

Parameter Specification
Model P71
Product Name T-Type Overhead Line Clamp
Brand CNNILED
Main Conductor Range 35–120 mm²
Branch Conductor Range 2 × 6–70 mm²
Connection Arrangement T-Type Branch Connection
Intended Application Overhead Electrical Distribution

These are the currently confirmed product details. Additional specifications such as rated voltage, torque, compatible conductor materials, applicable standards, and testing results should be requested before final product approval.

Typical Application Areas

Overhead Distribution Networks

Electrical distribution networks use many types of fittings to connect, secure, and arrange conductors.

The P71 T-Type Overhead Line Clamp can be evaluated for compatible branch connection arrangements in overhead networks where its conductor ranges and installation requirements are appropriate.

Main-to-Branch Connections

T-type conductor arrangements are relevant when an electrical line needs to branch from a main conductor.

The P71 offers a specified main and branch conductor configuration that helps designers, contractors, and buyers assess potential compatibility during product selection.

Infrastructure and Maintenance Projects

Electrical infrastructure work may involve replacing existing fittings or sourcing components for new installations.

In either case, the P71 should be checked against the project's conductor specifications, environmental conditions, and approved installation procedures.

Distribution and Wholesale Supply

Electrical hardware distributors and wholesalers may consider the P71 as part of a broader portfolio of overhead line accessories.

Clearly identified conductor ranges and model information help purchasing teams prepare accurate inquiries and compare alternatives.

How to Select the Correct Clamp

Start by confirming the main conductor cross-sectional area. For the P71, the stated main conductor range is 35–120 mm².

Next, check the branch conductor configuration of 2 × 6–70 mm² and confirm how it applies to the planned connection.

Review the conductor material and construction, including whether the conductors are insulated or bare. These characteristics may affect compatibility and must be checked against product documentation.

Also verify the installation environment, system requirements, and any technical approvals needed for the project.

Do not select an overhead line clamp based only on a similar appearance or model name.

Ask the supplier to confirm any performance criteria that are not explicitly listed, including electrical ratings, mechanical loads, tightening requirements, and standards compliance.

Installation and Handling Considerations

Installation should be performed by qualified electrical personnel following applicable safety procedures and the correct product instructions.

Before work begins, inspect the P71 housing and fastening assembly for damage and confirm that all required components are present.

Check the conductor sizes and verify that the intended connection arrangement matches the specified product configuration.

Follow the approved installation method and do not substitute an assumed tightening torque or connection procedure.

After installation, carry out any inspections required by the relevant project or electrical system.

Where a project requires specific documentation or testing evidence, obtain it before commissioning.

Why Choose CNNILED?

CNNILED supplies electrical power fittings and overhead line accessories for international customers.

Our range includes T-type clamps, suspension clamps, tension clamps, insulation piercing connectors, and other components used in electrical distribution projects.

We work with distributors, contractors, wholesalers, and procurement teams who need clear product identification and practical support when sourcing line fittings.

For P71 inquiries, customers can provide conductor specifications, expected quantities, and destination market information so our team can review the request.

Request a Quotation

Interested in the CNNILED P71 T-Type Overhead Line Clamp?

Contact CNNILED with your conductor details, intended application, order quantity, and any required technical documents.

Our team can respond to product information requests and quotation inquiries.

Website:https://www.cnniled.com

微信图片_20261104152454_499_850.jpg微信图片_20261104152455_500_850.jpg微信图片_20261104152455_501_850.jpg

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
inquiry

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
p71 t type overhead line clamp-1

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
Newsletter
Please Leave A Message With Us